볼스크류에 윤활유를 사용하는 것은 매우 중요한 문제입니다. 윤활은 내마모성과 전송 효율을 향상시킬 수 있습니다. 윤활유를 사용하기 전에 윤활유의 상태를 확인하십시오. 윤활이 좋지 않으면 볼스크류의 기능이 곧 상실됩니다.
When applying grease, it can be used directly. However, during use, if there is dust or powdery debris on the surface of the grease, please wash it with clean white kerosene, and then reapply the same new grease as the original grease. Mixing greases of different properties should be avoided.
After the inspection is put into use for 2 to 3 months, if there are large stains, the old lubricant on the product should be wiped clean, and then new lubricant should be applied. After that, the grease and lubricant replacement cycle should be checked regularly, usually one year, but the appropriate cycle interval should be set according to the use environment.
6개월마다 볼 나사의 그리스를 교체하고 기존 그리스를 청소하고 새 그리스를 바르십시오. 각 기계가 작동하기 전에 나사 막대에 오일을 윤활할 수 있습니다.
나사 막대는 출고 전에 윤활 처리되어 있지만 장기간 보관할 경우 방청유를{0} 발라주십시오. 방청유는{1}}윤활을 하지 않기 때문에 볼스크류의 오일은 사용하기 전에 오랜 시간 씻어내고 등유와 함께 세척하고 윤활해야 합니다.
