리니어 가이드는 금속재질로 녹이 발생하기 쉽고 녹이 슨 후에는 유지보수가 어렵습니다. 그래서 우리는 무엇을해야합니까? 다음은 리니어 가이드의 녹 관리에 대한 몇 가지 팁입니다. 참고하실 수 있기를 바랍니다.
1. The stop time is greatly shortened, so that the linear rail is in a state of moving and working at all times, and rust is prevented by increasing the frequency and efficiency of use.
2. It would be great if the scalar of the linear guide can be strictly controlled. As long as the scalar is within the specified range, the service life is generally relatively long. At the same time, it would be perfect if the noise interference on the linear guide can be reduced.
3. When working in a high-speed environment, try to reduce the temperature rise of the motor as much as possible, and do not let the motor sling oil. If the power consumption can be reduced, it would be better to protect the motor.
4. 청소를 하고 싶다면 분해된 부품을 최대한 분류해야 합니다. 부품마다 청소 방법이 다르기 때문에 미세한 청소와 거친 청소가 다르기 때문입니다. 동시에 리니어 가이드를 이리저리 두지 않도록 주의하십시오. 용기에서 금속 메쉬를 먼저 완충제로 사용해야 구성 요소가 용기의 더러운 물질과 접촉하지 않습니다.
5. If you are working at low temperature, it would be great if you can ensure the spirituality of linear guide start and the spirituality of work in advance, and at the same time, try to keep the output power as small as possible in a low temperature environment.
6. Keep the environment as clean as possible when using it. If the surroundings can be clean and clean so that small dust does not enter the space near the linear guide, then the probability of wear can be greatly reduced, and vibration and noise can also be reduced.
In short, the maintenance of linear guides requires patience and persistence. Doing the above points can prevent rust and improve the maintenance effect.
